翻訳と辞書
Words near each other
・ Fancy Bazaar
・ Fancy cancel
・ Fancy Chamber Music
・ Fancy Color Research Foundation
・ Fancy Crane
・ Fan Zhiyi
・ Fan Zhongyan
・ Fan's Field
・ Fan*tastik
・ Fan, Mirditë
・ Fan-beam antenna
・ Fan-bearer on the Right Side of the King
・ Fan-funded music
・ Fan-gating
・ Fan-in
Fan-out
・ Fan-out (software)
・ Fan-tailed
・ Fan-tailed berrypecker
・ Fan-tailed cuckoo
・ Fan-tailed gerygone
・ Fan-tailed grassbird
・ Fan-tailed raven
・ Fan-tailed warbler
・ Fan-tailed widowbird
・ Fan-Tan
・ Fan-Tas-Tic (Vol. 1)
・ Fan-Taz
・ FAN1
・ Fana


Dictionary Lists
翻訳と辞書 辞書検索 [ 開発暫定版 ]
スポンサード リンク

Fan-out : ウィキペディア英語版
Fan-out

In digital electronics, the fan-out of a logic gate output is the number of gate inputs it can feed or connect to.
In most designs, logic gates are connected to form more complex circuits. While no more than one logic gate output is connected to any single input, it is common for one output to be connected to several inputs. The technology used to implement logic gates usually allows a certain number of gate inputs to be wired directly together without additional interfacing circuitry. The maximum fan-out of an output measures its load-driving capability: it is the greatest number of inputs of gates of the same type to which the output can be safely connected.
== Logical practice ==

Maximum limits on fan-out are usually stated for a given logic family or device in the manufacturer's datasheets. These limits assume that the driven devices are members of the same family.
More complex analysis than fan-in and fan-out is required when two different logic families are interconnected. Fan-out is ultimately determined by the maximum source and sink currents of an output and the maximum source and sink currents of the connected inputs; the driving device must be able to supply or sink at its output the sum of the currents needed or provided (depending on whether the output is a logic high or low voltage level) by all of the connected inputs, while maintaining the output voltage specifications. For each logic family, typically a "standard" input is defined by the manufacturer with maximum input currents at each logic level, and the fan-out for an output is computed as the number of these standard inputs that can be driven in the worst case. (Therefore, it is possible that an output can actually drive more inputs than specified by fan-out, even of devices within the same family, if the particular devices being driven sink and/or source less current, as reported on their data sheets, than a "standard" device of that family.) Ultimately, whether a device has the fan-out capability to drive (with guaranteed reliability) a set of inputs is determined by adding up all the input-low (max.) source currents specified on the datasheets of the driven devices, adding up all the input-high (max.) sink currents of those same devices, and comparing those sums to the driving device's guaranteed maximum output-low sink current and output-high source current specifications, respectively. If both totals are within the driving device's limits, then it has the DC fan-out capacity to drive those inputs on those devices as a group, and otherwise it doesn't, regardless of the manufacturer's given fan-out number. However, for any reputable manufacturer, if this current analysis reveals that the device cannot drive the inputs, the fan-out number will agree.
When high-speed signal switching is required, the AC impedance of the output, the inputs, and the conductors between may significantly reduce the effective drive capacity of output, and this DC analysis may not be enough. See ''AC Fan-out'' below.

抄文引用元・出典: フリー百科事典『 ウィキペディア(Wikipedia)
ウィキペディアで「Fan-out」の詳細全文を読む



スポンサード リンク
翻訳と辞書 : 翻訳のためのインターネットリソース

Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.